![](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2022\/12\/feature_spraycontrol_2023_1100_550_f.jpg\" "\\"feature_spraycontrol_2023_1100_550_f\\"")
<\/span><\/div>![](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2021\/09\/steigrohr_plain_no_spraycontrol-1.jpg\" "\\"steigrohr_plain_no_spraycontrol\\"")
<\/span><\/div>When a gasket fails on flange connections, safety for people and materials is the most important thing.<\/p>\n<\/div>
Here we offer the optimum solution with SPRAY CONTROL!<\/p>\n<\/div>
SPRAY CONTROL is the best and safest splash guard ring,
\nstate-of-the-art technology.<\/p>\n<\/div>
![](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2021\/09\/steigrohr_plain_spraycontrol-1.jpg\" "\\"steigrohr_plain_spraycontrol\\"")
<\/span><\/div>![](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2015\/07\/spritzschutzring_spraycontrol_flanschverbindung1.png\" "\\"spritzschutzring_spraycontrol_flanschverbindung\\"")
<\/span><\/div><\/div><\/div>SPRAY CONTROL guarantees absolute safety, regardless of the flange type or size of a flange connection on which the ring is mounted.<\/p>\n<\/div><\/div><\/div>
SPRAY CONTROL is supplied for all sizes according to DIN and ANSI.
\nRequest a non-binding offer according to your specifications.
\nSPRAY CONTROL is resistant to aggressive, toxic environmental conditions as well as UV exposure and high temperatures, up to 600\u00b0C (1.112\u00b0F).
\nSPRAY CONTROL, safety first!<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>Link to article SPRAY CONTROL splash guard ring for Ex zones<\/span><\/a><\/h4><\/div>\nhttps:\/\/www.chemietechnik.de\/spritzschutzring-spray-control-fuer-ex-zonen\/<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span><\/span><\/a><\/h4><\/div>\nhttps:\/\/www.chemietechnik.de\/spritzschutz-fuer-flanschverbindungen-spray-control\/<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>Spray protection for flange connections Spray Control<\/span><\/a><\/h4><\/div>\nIn the event of gasket failure at flange connections, sometimes powerful or even fine swirling sprays can be generated, which can be distributed over a wide area in the system. Spray Control spray protection sleeves are used to prevent the resulting risk of injury to operating personnel.<\/div>\n<\/div>\nDecision-maker facts<\/h2>\n\n- \nResistant to oils and chemicals<\/div>\n<\/li>\n
- \ndoes not become brittle<\/div>\n<\/li>\n
- \nCan be used up to 400 \u00b0C<\/div>\n<\/li>\n<\/ul>\nIn the event of a leakage, the splash guard has the task of immediately relieving the escaping jet and discharging it without pressure, especially when irritating or corrosive, toxic, hot or flammable media are involved. However, the splash guard must never seal the flange, as otherwise an impermissible, uncontrolled pressure build-up would occur, which would lead to spraying again. The Spray Control spray protection system from Betek has proven itself for this task. Made of stainless steel WSt.Nr.<\/a> 1.4404 (ASTM 316), the sleeve is resistant to oils and chemicals, unlike plastic sleeves it does not become brittle and can be used up to 400\u00b0C. An internal net immediately decompresses the escaping spray. The medium drips downwards without lateral deflections, even high pressures (e.g. steam) are immediately dissipated. The integrated mesh prevents the sleeve from slipping and adapts to the gap between the flanges. The sleeve can also be used on flanges without a sealing gap. The splash guard can be fitted quickly and securely thanks to its clip lock. According to the manufacturer, the splash protection system is available for round flanges in all nominal sizes for DIN and ANSI. For other diameters, square and oval flanges, the collar is manufactured according to the customer’s requirements. Standard widths are 50, 70 and 90 mm.<\/div>\n<\/div>\nOur article in Chemical Engineering<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Spray Control DIN<\/h2><\/a><\/div><\/div>\n![\"flangeguard\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2016\/12\/product_spray_control-5274.jpg\")
<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control ANSI<\/h2><\/a><\/div><\/div>\n![\"\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2016\/12\/product_spray_control-5314.jpg\")
<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control Textile<\/h2><\/a><\/div><\/div>\n![\"spray](\"data:image\/svg+xml,%3Csvg%20xmlns%3D%27http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg%27%20width%3D%27100%27%20height%3D%270%27%20viewBox%3D%270%200%20100%200%27%3E%3Crect%20width%3D%27100%27%20height%3D%270%27%20fill-opacity%3D%220%22%2F%3E%3C%2Fsvg%3E\")
<\/p>\n<\/div>
<\/div>more about Ramco Safetyshields<\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div>Our “Spray Control” flange protection in a simulation on a defective flange connection with up to 300 bar
\nDifferent sizes and shapes were tested at 100, 200 and 300 bar at each pressure for 10 minutes.
\nThe same result with every test:
\nOur flange protection shows no signs of wear, deformation or defects.<\/h3>\nWe tested our Spray Control flange protection in a simulation at the renowned environmental simulation laboratory TREO in Hamburg.<\/h3>\n<\/div>
https:\/\/www.chemietechnik.de\/spritzschutzring-spray-control-fuer-ex-zonen\/<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span><\/span><\/a><\/h4><\/div>\nhttps:\/\/www.chemietechnik.de\/spritzschutz-fuer-flanschverbindungen-spray-control\/<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>Spray protection for flange connections Spray Control<\/span><\/a><\/h4><\/div>\nIn the event of gasket failure at flange connections, sometimes powerful or even fine swirling sprays can be generated, which can be distributed over a wide area in the system. Spray Control spray protection sleeves are used to prevent the resulting risk of injury to operating personnel.<\/div>\n<\/div>\nDecision-maker facts<\/h2>\n\n- \nResistant to oils and chemicals<\/div>\n<\/li>\n
- \ndoes not become brittle<\/div>\n<\/li>\n
- \nCan be used up to 400 \u00b0C<\/div>\n<\/li>\n<\/ul>\nIn the event of a leakage, the splash guard has the task of immediately relieving the escaping jet and discharging it without pressure, especially when irritating or corrosive, toxic, hot or flammable media are involved. However, the splash guard must never seal the flange, as otherwise an impermissible, uncontrolled pressure build-up would occur, which would lead to spraying again. The Spray Control spray protection system from Betek has proven itself for this task. Made of stainless steel WSt.Nr.<\/a> 1.4404 (ASTM 316), the sleeve is resistant to oils and chemicals, unlike plastic sleeves it does not become brittle and can be used up to 400\u00b0C. An internal net immediately decompresses the escaping spray. The medium drips downwards without lateral deflections, even high pressures (e.g. steam) are immediately dissipated. The integrated mesh prevents the sleeve from slipping and adapts to the gap between the flanges. The sleeve can also be used on flanges without a sealing gap. The splash guard can be fitted quickly and securely thanks to its clip lock. According to the manufacturer, the splash protection system is available for round flanges in all nominal sizes for DIN and ANSI. For other diameters, square and oval flanges, the collar is manufactured according to the customer’s requirements. Standard widths are 50, 70 and 90 mm.<\/div>\n<\/div>\nOur article in Chemical Engineering<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Spray Control DIN<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control ANSI<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control Textile<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>more about Ramco Safetyshields<\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div>Our “Spray Control” flange protection in a simulation on a defective flange connection with up to 300 bar
\nDifferent sizes and shapes were tested at 100, 200 and 300 bar at each pressure for 10 minutes.
\nThe same result with every test:
\nOur flange protection shows no signs of wear, deformation or defects.<\/h3>\nWe tested our Spray Control flange protection in a simulation at the renowned environmental simulation laboratory TREO in Hamburg.<\/h3>\n<\/div>
https:\/\/www.chemietechnik.de\/spritzschutz-fuer-flanschverbindungen-spray-control\/<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>Spray protection for flange connections Spray Control<\/span><\/a><\/h4><\/div>\nIn the event of gasket failure at flange connections, sometimes powerful or even fine swirling sprays can be generated, which can be distributed over a wide area in the system. Spray Control spray protection sleeves are used to prevent the resulting risk of injury to operating personnel.<\/div>\n<\/div>\nDecision-maker facts<\/h2>\n\n- \nResistant to oils and chemicals<\/div>\n<\/li>\n
- \ndoes not become brittle<\/div>\n<\/li>\n
- \nCan be used up to 400 \u00b0C<\/div>\n<\/li>\n<\/ul>\nIn the event of a leakage, the splash guard has the task of immediately relieving the escaping jet and discharging it without pressure, especially when irritating or corrosive, toxic, hot or flammable media are involved. However, the splash guard must never seal the flange, as otherwise an impermissible, uncontrolled pressure build-up would occur, which would lead to spraying again. The Spray Control spray protection system from Betek has proven itself for this task. Made of stainless steel WSt.Nr.<\/a> 1.4404 (ASTM 316), the sleeve is resistant to oils and chemicals, unlike plastic sleeves it does not become brittle and can be used up to 400\u00b0C. An internal net immediately decompresses the escaping spray. The medium drips downwards without lateral deflections, even high pressures (e.g. steam) are immediately dissipated. The integrated mesh prevents the sleeve from slipping and adapts to the gap between the flanges. The sleeve can also be used on flanges without a sealing gap. The splash guard can be fitted quickly and securely thanks to its clip lock. According to the manufacturer, the splash protection system is available for round flanges in all nominal sizes for DIN and ANSI. For other diameters, square and oval flanges, the collar is manufactured according to the customer’s requirements. Standard widths are 50, 70 and 90 mm.<\/div>\n<\/div>\nOur article in Chemical Engineering<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Spray Control DIN<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control ANSI<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control Textile<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>more about Ramco Safetyshields<\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div>Our “Spray Control” flange protection in a simulation on a defective flange connection with up to 300 bar
\nDifferent sizes and shapes were tested at 100, 200 and 300 bar at each pressure for 10 minutes.
\nThe same result with every test:
\nOur flange protection shows no signs of wear, deformation or defects.<\/h3>\nWe tested our Spray Control flange protection in a simulation at the renowned environmental simulation laboratory TREO in Hamburg.<\/h3>\n<\/div>
Decision-maker facts<\/h2>\n\n- \nResistant to oils and chemicals<\/div>\n<\/li>\n
- \ndoes not become brittle<\/div>\n<\/li>\n
- \nCan be used up to 400 \u00b0C<\/div>\n<\/li>\n<\/ul>\nIn the event of a leakage, the splash guard has the task of immediately relieving the escaping jet and discharging it without pressure, especially when irritating or corrosive, toxic, hot or flammable media are involved. However, the splash guard must never seal the flange, as otherwise an impermissible, uncontrolled pressure build-up would occur, which would lead to spraying again. The Spray Control spray protection system from Betek has proven itself for this task. Made of stainless steel WSt.Nr.<\/a> 1.4404 (ASTM 316), the sleeve is resistant to oils and chemicals, unlike plastic sleeves it does not become brittle and can be used up to 400\u00b0C. An internal net immediately decompresses the escaping spray. The medium drips downwards without lateral deflections, even high pressures (e.g. steam) are immediately dissipated. The integrated mesh prevents the sleeve from slipping and adapts to the gap between the flanges. The sleeve can also be used on flanges without a sealing gap. The splash guard can be fitted quickly and securely thanks to its clip lock. According to the manufacturer, the splash protection system is available for round flanges in all nominal sizes for DIN and ANSI. For other diameters, square and oval flanges, the collar is manufactured according to the customer’s requirements. Standard widths are 50, 70 and 90 mm.<\/div>\n<\/div>\nOur article in Chemical Engineering<\/div>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div>
Spray Control DIN<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control ANSI<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control Textile<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>more about Ramco Safetyshields<\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div>Our “Spray Control” flange protection in a simulation on a defective flange connection with up to 300 bar
\nDifferent sizes and shapes were tested at 100, 200 and 300 bar at each pressure for 10 minutes.
\nThe same result with every test:
\nOur flange protection shows no signs of wear, deformation or defects.<\/h3>\nWe tested our Spray Control flange protection in a simulation at the renowned environmental simulation laboratory TREO in Hamburg.<\/h3>\n<\/div>
Spray Control DIN<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control ANSI<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control Textile<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>more about Ramco Safetyshields<\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div>Our “Spray Control” flange protection in a simulation on a defective flange connection with up to 300 bar
\nDifferent sizes and shapes were tested at 100, 200 and 300 bar at each pressure for 10 minutes.
\nThe same result with every test:
\nOur flange protection shows no signs of wear, deformation or defects.<\/h3>\nWe tested our Spray Control flange protection in a simulation at the renowned environmental simulation laboratory TREO in Hamburg.<\/h3>\n<\/div>
<\/p>\n<\/div>
Spray Control ANSI<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>Request here<\/a><\/div><\/div><\/div>Spray Control Textile<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>more about Ramco Safetyshields<\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div>Our “Spray Control” flange protection in a simulation on a defective flange connection with up to 300 bar
\nDifferent sizes and shapes were tested at 100, 200 and 300 bar at each pressure for 10 minutes.
\nThe same result with every test:
\nOur flange protection shows no signs of wear, deformation or defects.<\/h3>\nWe tested our Spray Control flange protection in a simulation at the renowned environmental simulation laboratory TREO in Hamburg.<\/h3>\n<\/div>
<\/p>\n<\/div>
Spray Control Textile<\/h2><\/a><\/div><\/div>\n<\/p>\n<\/div>
<\/div>more about Ramco Safetyshields<\/a><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/div><\/lite-youtube><\/div><\/div><\/div><\/div><\/div>Our “Spray Control” flange protection in a simulation on a defective flange connection with up to 300 bar
\nDifferent sizes and shapes were tested at 100, 200 and 300 bar at each pressure for 10 minutes.
\nThe same result with every test:
\nOur flange protection shows no signs of wear, deformation or defects.<\/h3>\nWe tested our Spray Control flange protection in a simulation at the renowned environmental simulation laboratory TREO in Hamburg.<\/h3>\n<\/div>
![\"spray](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2014\/12\/sptex01.jpg\")
![\"\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2025\/11\/1222_clients_mtk_korea_200.jpg\" "\\"1222_clients_mtk_korea_200\\"")
<\/a><\/div><\/div>![\"\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2025\/11\/1222_clients_everllence_new_25_200.jpg\" "\\"1222_clients_everllence_new_25_200\\"")
<\/a><\/div><\/div>![\"\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2025\/11\/1222_clients_filtration_group_new25_200.jpg\" "\\"1222_clients_filtration_group_new25_200\\"")
<\/a><\/div><\/div>![\"\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2025\/11\/1222_clients_sanofi_new_25_200.jpg\" "\\"1222_clients_sanofi_new_25_200\\"")
<\/a><\/div><\/div>![\"\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2025\/11\/1222_clients_basf_new_25_200.jpg\" "\\"1222_clients_basf_new_25_200\\"")
<\/a><\/div><\/div>![\"\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2025\/11\/1222_clients_carnival_new_25_200.jpg\" "\\"1222_clients_carnival_new_25_200\\"")
<\/a><\/div><\/div>![\"\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2025\/11\/1222_clients_unilever_02_200.jpg\" "\\"1222_clients_unilever_02_200\\"")
<\/a><\/div><\/div>![\"\"](\"https:\/\/spraycontrol.de\/wp-content\/uploads\/2025\/11\/1222_clients_bayer_200.jpg\" "\\"1222_clients_bayer_200\\"")
<\/a><\/div><\/div>